W 4x13 H-beam (Wide Flange)
A572/A9924" idler13 lbs/ft4.16 × 0.280 × 4.06 in
- Highest yield strength
- Widest flange — least wall pressure
- Required for tall walls
Required for walls 8 ft+ or soil 7 ft+
Buy on MetalsDepot ↗
The patented brace for basement walls whose floor joists run perpendicular to the bowing wall. Straighten a bowing, bulging, or buckling wall yourself — no excavation, often in a single day.
$149.95per brace · most walls need 3–5
Steel Beam is NOT Included
This kit is the brace hardware only. You supply the steel beam, cut to your wall height. Order from our steel supplier or any local steel yard.
Two quick steps to find your idler size & how many braces you need.
Ships in 2–3 business days once restockedEngineer-stamped & patented
Plan Your Project
Size and space your braces
Answer a few quick questions on each side — which steel beam to buy, and how many braces your wall needs. Your answers set the idler size and quantity in the reserve bar below.
Size It Right
Find your beam & idler size
1Tell us about your wall
Finished wall height
Soil backfill depth
Space It Right
How many braces will I need?
1What is your wall made of?
The number is the wall's thickness — measured from the inside of your basement out to the dirt.
Is the wall cracked in more than one direction?
2How long is the bowing wall?
Length of the wall you're bracing
24 ft
Answer the questions above to estimate how many braces your wall needs.
Clear ceiling obstacles where you can. Where you can't, our instructions show you how to brace around ducts, pipes, and beams.
An estimate from our engineering spec. Always round up, and call us if your wall has obstacles or unusual cracking.
$149.95 per brace
Size your beam to lock in the idler kit
1
Ships in 2–3 business days once restockedEngineer-stamped & patented
Patented
Engineer Stamped
DIY Friendly
Overview
Straighten your wall — without tearing up the yard
Gorilla Wall Braces® are the only Professional Engineer-Stamped DIY solution to straighten bowing basement walls. The patented system pushes off three floor joists, giving it vastly more strength than competing braces that use only one.
Installation typically takes about 30 minutes per brace — most homeowners complete a full wall in a single day, without excavating the exterior or removing the concrete floor. By regularly tightening the adjustment screw, most walls can be straightened over time.
Watch this customer video review to see before-and-after results from a severely bowed basement wall repaired for under $4,000.
Specifications
The details
- Material
- Steel
- Length
- Adjustable 9–11 ft
- Wall Capacity
- Up to 3" bow
- Joist Span
- 3 floor joists
- Certification
- Engineer-stamped
- Origin
- Manufactured in USA
- Warranty
- Lifetime
- Shipping
- Ships in 2–3 business days
Steel Beams
Which steel beam should I buy?
Any of these three engineer-approved beams will straighten your wall — the right pick comes down to your wall height, wall type, and how much weight you want to lift. Each one pairs with a specific idler size, which the finder in the buy box selects for you.
S 4x9.5 Standard I-beam
A36/A572-503" idler9.5 lbs/ft4.00 × 0.326 × 2.796 in
- Lighter than H-beam
- More wall surface area
- Preferred on block walls
Best for walls under 8 ft on block foundations
Buy on MetalsDepot ↗2×4 Tube Steel 1/4"
2" idler lbs/ft2 × 4 × 1/4 in (2" side to wall)
- Most economical
- Lightest option
- 2" side mounts to wall — minimal floor-space impact
Most economical; ideal for sound poured-concrete walls
1/4" standard wall; upgrade to 5/16" for walls 8 ft+
Buy on MetalsDepot ↗Need more detail on dimensions, steel grade, and where to buy? View the Steel Beam Reference →
In the Box
What's included
Gorilla Wall Brace kit (all hardware)
Floor bracket assembly
Ceiling bracket assembly
Adjustment screw and hardware
10% MetalsDepot coupon for steel beam
Link to 12-minute installation video
Written installation instructions
Steel beams are NOT included — order them separately, cut to your wall height.
Installation
How it works
1
Confirm your joist direction
Look up at the joists over the bowing wall. Running into the wall? This perpendicular brace is the right choice.
2
Mount the bracket to a joist
The patented bracket lags onto the side of a floor joist — your home becomes the anchor point.
3
Set the steel beam
Stand your cut-to-length steel beam against the wall and seat it into the idler.
4
Tighten gradually
Use the torque wrench to apply pressure. Over days or weeks, snug it further to walk the wall back to plumb.
Reviews
What homeowners say
"Wall was bowing almost two inches. Installed four braces in an afternoon and it has not moved since. A contractor quoted me $14,000 — this cost a fraction of that."
D
Dave R.
Cincinnati, OH ·
✓ Verified buyer
"The joist diagram on the product page is what sold me — I finally understood I needed the perpendicular version. Hardware is seriously beefy and the instructions are clear."
M
Marcus T.
St. Louis, MO ·
✓ Verified buyer
"Great product. Only note: order your steel beams early, they are NOT included. Once I had the steel it went together in one Saturday."
L
Linda K.
Buffalo, NY ·
✓ Verified buyer
Complete Your Project
Required Items & Tools
You'll also need
Required · Not Included
Steel Beams — Cut to Length
Wide-flange W or H beam, cut to your wall height. Order from our steel supplier.
